基于CFD技术优化50 L发酵罐内气体分布器

通过CFD模拟技术对50L通气搅拌发酵罐内不同气体分布器的传质混合效果进行气液双相流模拟。首先对发酵罐自带气体分布器进行流场模拟,针对模拟结果提出两种改进气体分布器。结果表明:双层环形气体分布器表现出一种较理想的混合传质效果,为此类发酵罐的优化和放大提供一种有效的技术手段。     

基于虚拟化技术的在线开放课程建设研究--以“常用工具软件”课程为例

随着互联网的迅猛发展,建设在线开放课程成为高职院校信息化教学改革的一个方向。首先通过分析国内外的在线课程现状,发现阻碍在线课程发展的共性问题;然后对"常用工具软件"课程现状进行深入调查、分析和研究,提出将虚拟化技术应用到课程建设中以解决网络教学遇到的问题;最后将研究结论应用到教学实践中,用于提升学生专业能力,提高教学效果。     

Fe-BHA用于白钨矿的浮选分离

将FeCl3与苯甲羟肟酸按一定比例混合,形成一种金属离子螯合物Fe-BHA,用于白钨矿-方解石人工混合矿浮选分离。在pH值为7.7时,取得最佳的白钨精矿回收率为68.00%,白钨矿分离指数为2.83,可实现白钨矿在较高精矿回收率的前提下与方解石的有效分离;而在白钨矿-萤石人工混合矿的浮选分离试验中,在pH值11.0时,取得的萤石精矿回收率为78.20%,分离指数为3.51,理论上可以实现白钨矿与萤石的分离。Fe-BHA用于香炉山白钨矿实际矿石的粗选验证试验,在适宜条件下,可获得产率为30.53%、精矿中WO3品位为1.56%、回收率为63.50%的白钨精矿,相比同条件下单独使用苯甲羟肟酸的浮选结果较好。白钨矿的红外光谱证明了Fe-BHA在白钨矿表面化学吸附的存在。     

人工砂混凝土性能试验研究

采用正交试验方法配制了不同人工砂取代率、石粉含量、粉煤灰含量的混凝土, 对比了每组混凝土的坍落度, 研究了3 d、28 d龄期混凝土的抗压性能。结果表明: 最优配比的人工砂取代率、石粉含量和粉煤灰含量分别为10%、3%和5%, 此时28 d抗压强度为40.1 MPa, 满足30 MPa的混凝土设计强度。     

可生物降解农用地膜研究现状及发展

地膜是继种子、农药、化肥之后的第四大农业生产资料。我国作为最大的农膜消费国,传统农膜的主要成分是不可降解聚乙烯PE,农膜残留对各地土壤造成了不同程度的污染。生物降解农用地膜具有原材料丰富、成本低、理化性能良好、环境友好等特点。综述了可生物降解农用地膜的种类及其应用效果,重点介绍生物可降解纸地膜、塑料地膜与可喷涂地膜的研究,并提出生物降解农用地膜的发展前景。     

Preparation of molecularly imprinted fluorescence sensor based on carbon quantum dots via precipitation polymerization for fluorescence detection of tetracycline

A facile and effective method was proposed to prepare the molecularly imprinted fluorescence sensor with carbon quantum dots, which were modified vinyl groups by acrylic acid on the surface. The obtained fluorescence composite material was investigated by transmission electron microscope and Fourier transform infrared spectra. After the experimental conditions were optimized, a linear range of 1.0–60 μmol L⁻¹ was obtained and the detection limit was 0.17 μmol L⁻¹. The novel fluorescence sensor can be successfully used to detect tetracycline in real samples. This study provides a convenient strategy for selective recognition and rapid detection of tetracycline in the complex environment.     

Predicting visual similarity between colour palettes

This work is concerned with the prediction of visual colour difference between pairs of palettes. In this study, the palettes contained five colours arranged in a horizontal row. A total of 95 pairs of palettes were rated for visual difference by 20 participants. The colour difference between the palettes was predicted using two algorithms, each based on one of six colour-difference formulae. The best performance (r² = 0.86 and STRESS = 16.9) was obtained using the minimum colour-difference algorithm (MICDM) using the CIEDE2000 equation with a lightness weighing of 2. There was some evidence that the order (or arrangement) of the colours in the palettes was a factor affecting the visual colour differences although the MICDM algorithm does not take order into account. Application of this algorithm is intended for digital design workflows where colour palettes are generated automatically using machine learning and for comparing palettes obtained from psychophysical studies to explore, for example, the effect of culture, age, or gender on colour associations.     

On cutting temperatures in high and ultrahigh-speed machining

Since Dr. Carl Salomon proposed the well-known hypothesis on cutting temperatures in 1931, the debate on the hypothesis has never stopped. It shows that ev     

薄壁弱刚性钛合金结构件制造工艺

随着新型材料冶金技术的发展与进步,钛合金作为“崛起的第三代金属”已完全替代了铝镁合金和钢构件,成为航天飞行器上应用范围最广的材料之一。从某新研制航天飞行器外部结构件用钛合金材料的特性及切削特点入手,针对薄壁弱刚性钛合金结构件在实际加工过程中遇到的诸多难点,提出了相应的解决办法,并重新设计了零件工装。结果表明,改进措施不仅保证了零件质量,而且提高了零件加工效率,使单件零件的生产周期缩短了近10h。     

微织构刀具对工件表面残余应力影响有限元分析

针对微织构刀具对切削工件表面残余应力的影响,设计不同尺寸的垂直槽和平行槽微织构,利用有限元仿真技术,模拟不同类型、不同尺寸微织构PCBN刀具干式车削GCr15试验。通过对有限元结果进行研究分析,得到已加工表面残余应力分布情况,并与无织构PCBN刀具对比,分析微织构对已加工表面残余应力的影响。有限元仿真结果表明:与无织构刀具切削工件表面获得拉应力相比,槽型织构刀具切削后的工件已加工表面呈现压应力,提高工件表层的耐磨损和耐疲劳性能;宽度50μm垂直槽和宽度40μm平行槽刀具切削得到的工件表面压应力最大,对工件表面应力分布影响最显著。